Remove and Go Archives - Monmouthshire Tile Doctor

Victorian Tiled Hallway Floor Cleaning Sealing Chepstow

Badly Maintained Victorian Tiled Hallway Renovated in Chepstow

I received a request to quote for the restoration of this Victorian tiled floor in the hallway of a property in Chepstow. As you can see from the photograph below was in a very poor condition.

Victorian Tiled Hallway Floor Before Cleaning Chepstow

I visited the property to survey the floor and could see that although it had not been well maintained it was in good physical condition except for a few loose tiles. From experience I knew it would respond well to a deep clean and seal, so I carried out a test clean on a small area to demonstrate its potential. The tiles came up well and my client was satisfied it would be worthwhile to have it restored.

I worked out a quote which was accepted and a date set for the work to start which would take two days.

Cleaning and Repairing a Victorian Tiled Hallway

To get all the dirt out of the pores of the tiles I started with a strong dilution of Tile Doctors Remove and Go. This was sprayed onto the floor and left to soak in for ten minutes before being scrubbed in with a 17” Black pad fitted to a rotary machine.

It’s always difficult to find out the history of a floor but from what I could tell the tiles had been exposed to a variety of contaminants including paint, plaster, cement, and worn in dirt. Luckily, Remove and Go can handle all of these. I had to repeat the process on the stubborn stains and then removed all the slurry and dirt using a wet vacuum.

I then moved onto the loose tiles which needed to have the old adhesive removed from the tile and the base. The original tiles were then cleaned up by hand before new rapid setting adhesive was applied to secure them back into the floor.

Once the loose tiles had set, I moved onto the next step of giving the floor an acid rinse using Tile Doctor Acid Gel. This product further cleans up the tiles by removing old grout smears and dissolving efflorescent salts in the floor. This is a common issue in properties of this age which do not have a damp proof membrane to stop moisture rising through the tile. This process also neutralises the pH level of the floor after the use of Remove and Go which is a strong alkaline cleaning product. The floor was rinsed again afterwards, and the soiling extracted with a wet vacuum before leaving it to dry overnight.

Sealing a Victorian Tiled Kitchen

The next day the moisture levels of the tiles were checked with a damp meter to ensure they were dry enough to be sealed. The readings were fine, so I was able to start applying the sealer. In this case two coats of Tile Doctors Colour Grow sealer where applied which is a colour enhancing impregnator that allows for moisture vapour transmission. This is a super durable product which will give great protection to the floor, especially when it is in a high traffic area such as a hallway.

Victorian Tiled Hallway Floor After Cleaning Sealing Chepstow

Once complete the floor was transformed and my client was extremely happy with the result. To maintain the sealer and to prevent accelerated break down I left the client with a complimentary bottle of Tile Doctor Ph Neutral Tile Cleaner.

Professional Restoration of a Victorian Tiled Bathroom in Monmouthshire

Badly Maintained Victorian Tiled Hallway Renovated in Chepstow Read More »

Victorian Tiled Dining Room Floor Restoration Newport

Repair and Renovation of a Victorian Tiled Dining Room Floor in Newport

The client had lived at this property in Newport for a few years and decided that it was finally time to sort out the Victorian tiled floor in the dining room. Some repairs were needed in a few areas and the sealer was fading and due for replacement.

Victorian Tiled Dining Room Floor Before Renovation Newport

I went over to the property to survey the floor and advised that with repairs, cleaning and sealing the process would take two and a half days. Having worked on many many floors like these before I was very confident that we could repair the floor where needed and restore its appearance.

During the visit I noticed that at the door threshold leading into the kitchen, some of the tiles had been taken up for a gas pipe repair and back filled with cement, I suggested I could repair this section using matching tiles, so I included it in the quote. The quote to renovate and repair the floor was accepted and the job was booked in.

Victorian Tiled Dining Room Floor Before Renovation Newport

Cleaning and Repairing a Victorian Tiled Dining Room Floor

I began by addressing the tiling issues so my first course of action was to set matching tiles along the doorway border leading to the kitchen, as the previous tiles had already been removed by the gas company it was fairly straight forward job of carefully knocking out the cement. The tiles I had sourced were from a nearby reclamation yard and needed to be carefully cut to size to ensure a good fit with the original. After setting the tiles and grouting I left them to dry overnight.

The following day I began cleaning, using a combination of Tile Doctor Remove and Go and Pro-Clean, leaving the solution to dwell after being brushed into the floor. After around ten minutes the floor was scrubbed by hand with a stiff brush to release the dirt from the tiles. The resultant slurry was then vacuum away and with the floor cleaner I was able to get a better idea of which areas needed more attention.

I restored the perimeter of the floor with a 200-grit diamond block and this was followed up with a 200-grit diamond pad fitted to a rotary machine. These coarse pads cut into the tile surface removing years of grime and giving them a new lease of life. After another rinse and extraction with the wet vacuum the whole floor had a much brighter appearance. The process was then repeated with a 400-grit diamond pad to close the pores of the tiles.

The floor was then washed by hand with water and a sponge to make sure there wasn’t any areas missed, also to ensure there was no residue from the cleaning products left on the floor which could potentially disrupt the sealing process. The floor was then left to dry overnight ready for sealing the following day.

Sealing a Victorian Tiled Dining Room

To assist with drying I asked the client to leave a couple of air movers running during the evening and to put them back on in the morning. This worked well and by the next day I was able to confirm the floor was dry and ready for sealing with a moisture meter.

The client had requested a satin finish and so the sealer chosen was Tile Doctor Seal and Go, four coats were applied to the tiles a permanent wet look and gorgeous lustre. Another advantage of Seal and Go is that it’s a water-based sealer so it doesn’t give off a smell as it dries.

Victorian Tiled Dining Room Floor After Renovation Newport

For aftercare I left the client a bottle of Tile Doctor pH Neutral Tile Cleaner to help maintain the appearance of the floor. This is a gentle tile cleaning product that won’t harm the sealer, many of the products you find in supermarkets are simply too strong for a sealed floor.

Victorian Tiled Dining Room Floor After Renovation Newport

Professional Restoration of a Victorian Tiled Floor in Monmouthshire

Repair and Renovation of a Victorian Tiled Dining Room Floor in Newport Read More »

Parquet Covered Marble Floor Restoration Monmouth

Marble Tiles Hidden under Parquet Flooring Restored in Monmouth

1 Comment / Marble Tile Cleaning, Monmouth Tile Cleaning / Max Iacono

We discovered these Black and White Marble tiles under Parquet flooring at an 1890’s mansion house near Monmouth. The property had been converted into flats in the 1980’s and originally there was polished black and white marble throughout the entire ground floor however over the years, maintenance had been carried out resulting in parts of the floor having to be ripped up and filled with concrete.

Our customer had recently purchased the flat on the ground floor and were hoping to move in within the next couple months following renovation work. We were asked to remove the wooden parquet, restore the Marble floor, and lay 50sq m of tiles in their dining area.

During our survey we noticed there were several small areas in the bedroom where the Marble tiles had been taken up and backfilled with concrete so after discussing this with the owner, we agreed to replace this floor with matching Black and White Marble tiles from a reclamation yard.

Parquet Covered Marble Floor Before Restoration Monmouth

Parquet Covered Marble Floor During Restoration Monmouth

With the scope of the work and our quote agreed a date was set for the work to begin and in the meantime, we started looking for Marble tiles in local reclamation yards.

Restoring Parquet Covered Marble Flooring

The first job was to prepare all the floors for cleaning which in this case involved completing the removal of the Parquet flooring and concrete backfill that had been used in some areas. This was a large enough job on its own but the most difficult part was to clean all the bitumen and adhesive that had been used to secure it in place.

The main challenger we faced on these two floors were breaking up and removing the areas where concrete had been filled in without disturbing neighbouring tiles as they are expensive to replace. With the floor clear of rubble, the replacement matching Marble tiles were laid to the original pattern and grouted in.

Parquet Covered Marble Floor During Restoration Monmouth

The bitumen adhesive issue was tackled initially using a dry scrape of the tiles to remove as much of the gluey substance as possible. Once done there was a vast improvement on our visibility of the tiles and condition of the floor and this revealed that every White tile in the hallway had been painted Red at some point in its long history. We hadn’t anticipated this problem however our next step was to further clean up the tiles using Tile Doctor Remove and Go which is a coatings remover and should help.

The Remove and Go was applied neat for maximum impact and left to soak in for ten to twenty minutes before being scrubbed in. The dwell time gives the product time to breakdown the coatings, softening them and thereby making them easier to remove. The method worked and we were able to scrape off all the glue and red paint which it turned out had been applied to the whole floor and not just the White tiles.

Parquet Covered Marble Floor During Restoration Monmouth

Once done both Marble floors were inspected and it was clear they were still substantially soiled with dirt and further cleaning would be required. To this a strong dilution of Tile Doctor Pro-Clean was applied to both floors, left to soak in as before and then scrubbed with a course deck brush to release the dirt. The soiling was then removed using a wet vacuum and the floor given a further inspection. This removed 95% of the dirt but we were not 100% satisfied so the whole process was repeated.

Polishing Restored Marble Tiled Flooring

Our final step in restoring the appearance of the original Marble tiles was to restore the polished appearance of the stone using a series of burnishing pads of different grits. This process began with a very coarse 100 grit pad which really cuts into the stone removing a thin layer of stone from the surface.

This 100-grit pad was followed by 200, 400, 800 and 1500-grit burnishing pads, water is used to provide lubrication and the floor is rinsed and soiling extracted using the wet vacuum after each pad. This process slowly rebuilds the appearance and polish on the Marble. The polishing process is finished the application of a very fine 3000-grit burnishing pad which is applied dry with only a little water sprayed onto the Marble tile.

Sealing a Marble Tiled Entrance Hall Floor

We Left the floor for 24 hours to fully dry out and returned on the last day to protect the Marble with a sealer. The customer specified they wanted a durable satin, wet look finish but so we suggested using Tile Doctor Seal and Go.

Parquet Covered Marble Floor After Restoration Monmouth

This product is a water-based sealer that gives the desired effect and make it easy to keep clean, additionally being water based it doesn’t leave a smell as it dries. Several coats were applied and once done the customer was thrilled.

For aftercare cleaning I recommended they use Stone Soap as its designed for the regular cleaning of sealed and polished stone, as well as cleaning it also helps build the patina.

Professional Restoration of a Mable Tiled Hallway in Monmouthshire

Marble Tiles Hidden under Parquet Flooring Restored in Monmouth Read More »